Designed for larger areas: large school buildings,
airports, hospitals - The ATX6 transceiver supports over 500,000
square feet of signal coverage.
The ATX6 not only gives you the power, but the power of choice.
Use WWVB radio signal (atomic clock), Ethernet, GPS or its own
internal time as your time source. The ATX6 then
transmits wireless signals to all clocks in it's radius. No
wires. No worries. No limitations!
FEATURES
Powerful 6 watt radio transmitter covers 500 foot radius (over
700,000 sq. ft.) indoors (depending on building structure) and one
mile outdoors (depending on terrain)
Transmits AirTime radio signals every minute
Provisions to transmit AT and RC signals on alternating minutes
for mixed RC and AT clock systems
Internal real time clock provides accuracy of +/-2 minutes per
year and automatic Daylight Saving Time corrections
Precision time options: synchronize to your choice of
WWVB (requires ATX), GPS
(requires ATX-GPS), LAN/Ethernet, ATX6 internal
source or from your building's existing wired
system.
WWVB
GPS
LAN/Ethernet
ATX6 Internal
Wired System
Time zone selection feature correctly offsets hour when
synchronizing to atomic clock
Provisions to correct with LAN via Ethernet or other AT
transceivers via radio signals
Internal dry contact allows time synchronization (send or
receive) with external systems (ex. intercom, wired master
controls)
RS485 input or output port allows synchronization with other Lathem signal devices or wired clock
systems.
One year warranty
This device requires that an FCC License be
obtained. Each installation of this device will require a
separate license. It is the responsibility of each user of this
device to obtain and maintain the required FCC License. For
information on obtaining the required license contact your
distributor or review the information in the FCC section of the
specifications
SPECIFICATIONS
Dimensions: 5.2"W x 9.0"H x 3.2"D
Weight: 3.8 lbs
Color: Cool Gray/Gray
Power supply input: 90 - 250VAC
Power supply output: 12VDC, 40 watts
Maximum transmission power: 6 watts
Radio frequency: 452 MHz
Channels available: 80 (8x10)
Signal transmission for continuous synchronization occurs:
Every minute
Daylight Savings Time option: Yes
Time zone options: 24
Operating tmperature: 0° ~+ 50°C
FCC Part 15 and Part 90 Compliant
UL Listed
ACCESSORIES
AT-MSX Wireless Sync Device
AT-ANTHP High Power Indoor Antenna
AT-ANTOD High Power Outdoor Antenna
ATX-GPS Time Source Receiver
ATSYNC-KIT Ethernet Time Sync Kit
AT20WT Amplifier
More information on these accessories under the RESOURCES
tab.
When obtaining an FCC License for this device it is suggested
you go through a qualified Frequency Coordinator.
Palidor Radio Communications Consultants
is one such organization. They can be contacted at http://www.palidor.com or
reached by phone at 1-866-987-3137. They can assist you in
obtaining the proper FCC license for this device. The specific
frequencies to be licensed are 452.3125MHz (for AirTime clocks) and
464.6000MHz (if supporting legacy RC systems).